HYDROCARBON SPRAY

DESCRIPTION : Refrigerant system if charged, earlier, with CFC refrigerant recover it. Replace required parts and braze the tube joints carefully. Test all connections for leaks with leak detector or soapy water. Rectify the leak before evacuation & recharging the system. Evacuate adequately and charge the system through lowpressure side as per recommended procedures suitable for hydrocarbon refrigerants. Make sure that the can is placed inverted allowing only liquid to flow. If a system has been overcharged or has a leak then evacuating and following the charging procedure must be done again. Label the system with the refrigerant tag without fail.

NOTE : Over charging the system makes it less efficient. Do nor add excess refrigerant than the recommended weight as it may damage compressor.